620SLIM Posted November 30, 2012 Report Share Posted November 30, 2012 What should I expect when looking to replace a front seat price wise? Quote Link to comment
metalmonkey47 Posted November 30, 2012 Report Share Posted November 30, 2012 Depends on what you get. Shouldn't be hard to find a nice set of buckets used for less then $200. Quote Link to comment
Z-train Posted November 30, 2012 Report Share Posted November 30, 2012 I just got a price of $300.00 for my 810 buckets.That is with all new foam. Quote Link to comment
datsunaholic Posted November 30, 2012 Report Share Posted November 30, 2012 Front seat? You have another? Replace or repair? Repair depends on how badly damaged- there's a simple recover, there's recover with new foam, and there's repair with springs, foam, cover. Or there's replace, at which it depends on with what. Replacing the bench (if it's a bench instead of buckets already) means finding another bench that will fit, or putting buckets in. Since ONLY 620 seats fit properly, you'd need to do some customizing. At a minimum, that's using the original 620 rails on seats of similar size. At worse, you'd need to make new seat mounts in the floor. If it's a standard cab you are very limited in what you can use, as you will find that unless you're a 110 lib, 5'4" twig, most modern or aftermarket seats will have you way too close to the steering wheel and pedals since the cab is so small. King cabs have far more options since space is not nearly as cramped. Look to spend anywhere from $25 to $150 each for junkyard seats. Reupholstry anywhere from $200 on up. Or you could just do what my folks did after the springs started sticking through and throw an old bedspread on it and call it good. 1 Quote Link to comment
620SLIM Posted November 30, 2012 Author Report Share Posted November 30, 2012 It's a bucket in a regular cab. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.