MidNite510 Posted October 9, 2012 Report Share Posted October 9, 2012 i want to buy a mild cam for my L18 with a peanut head and side drafts. I dont know whts a good cam to get. Quote Link to comment
datzenmike Posted October 9, 2012 Report Share Posted October 9, 2012 Stock L20B is the same (very very close) to the L16SSS cam. 0.413 lift 248 duration. Quote Link to comment
banzai510(hainz) Posted October 9, 2012 Report Share Posted October 9, 2012 Isky cam 475 or the 480 lift Webcamshaft.com 488lift/252 Schneider Quote Link to comment
MidNite510 Posted October 10, 2012 Author Report Share Posted October 10, 2012 I have a 219 head that I took from my L16sss engine but thank u for the info. Heinz thank u too am going to go with ur info. Quote Link to comment
banzai510(hainz) Posted October 10, 2012 Report Share Posted October 10, 2012 getting cam is EZ part. Sometimes you got to wait for them to grind it as most dont want to keep them in stock and nobody buys them. then getting the lashpads retainers and best to get new rockers(rockauto.com )has them cheap now for the Beck Arnly Brand Jap made ones( I hope jap made) Quote Link to comment
blackwolf Posted October 19, 2012 Report Share Posted October 19, 2012 anyone know of a mild cam for a z24 i just want a little more power than stock Quote Link to comment
CharlieW Posted October 21, 2012 Report Share Posted October 21, 2012 anyone know of a mild cam for a z24 i just want a little more power than stock ....check out the Nismo catalog...its on like page 83 iirc...get the part number and the phone number to Nismo and call your local dealer with those...the dealer will say they can't do it because the part number is no good, but they can...that's why they have to call. Msrp is less than a hunred too! I have this in my z24...it also has a Weber 38 and ported cylinder head. So far I have only logged a mile or two because the tires won't hold air because they're dry rotted...but it feels really incredible compared to before. Also has decent idle qualities...right around 850. Quote Link to comment
banzai510(hainz) Posted October 23, 2012 Report Share Posted October 23, 2012 Blackwolf if using the Nissan part number write in M- the part number and it should work at Nissanparts.cc. M is for motorsport. M-99996-D1017 a 99996 number means made in USA also Webcamshafts.com has more agressive cams also http://www.nissanparts.cc/cart/?pn=M-99996-D1017 this might coem out of Tennesee where Motorsports moved to(old parts) Cant guaentee anything. Quote Link to comment
blackwolf Posted October 28, 2012 Report Share Posted October 28, 2012 thanks for the info banzai510(hainz) defiantly have to check that out Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.