yenpit Posted August 4, 2012 Report Share Posted August 4, 2012 I've got a bunch of stock L16 "210" cylinder heads. These are the stock USA-spec, open chamber, small valve, small port heads. Sold with valves, WITH cam towers, but NO CAM. Need to thin down my collection of bulky heavy parts! Get one before some of them go to scrap! $30 + shipping EACH OR $50 + shipping EACH checked for warpage & cracks at the machine shop Link to comment
yenpit Posted August 6, 2012 Author Report Share Posted August 6, 2012 Nobody needs a boat anchor!!?? Looks like I'll be stripping 'em bare, saving the valve train parts, and scraping the aluminum! Link to comment
Xnke Posted August 6, 2012 Report Share Posted August 6, 2012 Hang on, now, hold up and lemme know if you still have one. I'd like the cleanest 30$ unit you have, NO water jacket corrosion or it won't weld worth a shit. Also; are these round port or square port? If it's a roundie, I'll pass...I've seen the L4 heads with and without round ports and can't make heads or tails of the casting numbers yet. Link to comment
yenpit Posted August 7, 2012 Author Report Share Posted August 7, 2012 As far as I know, all of the "210" L16 heads had square exhaust ports. Link to comment
yenpit Posted August 7, 2012 Author Report Share Posted August 7, 2012 Xnke, PM sent! Looks like shipping to the WEST COAST will be just UNDER $40 via Fed Ex Ground, midwest & east coast would be a l'il cheaper. That is shipped in a new box, very well packaged to avoid any damage! A re-cap on prices.............. $30 + shipping with valves, springs & cam towers $50 + shipping with valves, springs & cam towers AND machine shop checked out People have asked, so here's more options........ $45 + shipping with above parts + rockers, spring clips & whatever lash pads are in that head $60 + shipping with above parts + rockers, spring clips & whatever lash pads are in that head AND machine shop checked out Link to comment
yenpit Posted August 22, 2012 Author Report Share Posted August 22, 2012 Couple more left............... Link to comment
yenpit Posted August 31, 2012 Author Report Share Posted August 31, 2012 Still a couple more left!! Link to comment
Recommended Posts