gonzo Posted April 15, 2012 Report Share Posted April 15, 2012 Hello again. Well I decided to scrap the twin SU set up (as seen in other post) for a Single Weber DCOE. A lot easier to tune and work on (so I was told) and am really tired of the stock Hitachi. Hopefully someone has one laying around that they could sell me. Am in the L.A. Area. Also if you know the jetting for a 40mm that would be great or I'll deal with it later. Might also be selling the twin SU for parts or rebuilt if anybody is interested. Thanks Link to comment
Sealik Posted April 16, 2012 Report Share Posted April 16, 2012 SUs are pretty easy to tune/setup if they're in decent shape..... Link to comment
gonzo Posted April 16, 2012 Author Report Share Posted April 16, 2012 they seem to be in OK shape but don't know for sure. i sort of like Weber's more so hopefully its a win, win situation if i can get an intake. Link to comment
gonzo Posted April 18, 2012 Author Report Share Posted April 18, 2012 Bump! Lynx or Cannon.............. Anybody? :confused: Link to comment
banzai510(hainz) Posted April 18, 2012 Report Share Posted April 18, 2012 Im thinking you should start with a 32/36 DGV with the adapter to get this rig running right. those 40mm set ups people never seem to get right and really not to many people run them. As most of those carbs are from 2 carb set ups and then you need to jet them and webers have a funky jetting system. If it bolt on and works then great. But we need t know if its a carb proplem to be sure you have and not induce another mis jetted carb on a already proplem. Link to comment
gonzo Posted April 18, 2012 Author Report Share Posted April 18, 2012 It looks like nobody has a spare manifold around so am going to start looking for a 32/36 then. Maybe I sell/ trade the 40dcoe with A12 intake or might just hold on to it and make a dual set up later. Link to comment
toddc Posted June 2, 2012 Report Share Posted June 2, 2012 I've got a Lynx single sidedraft manifold.....$225 -Todd Link to comment
toddc Posted June 3, 2012 Report Share Posted June 3, 2012 For which engine? It will fit any of the L series 4cyl. -Todd Link to comment
ggzilla Posted June 3, 2012 Report Share Posted June 3, 2012 If only we knew which engine Gonzo needs the intake for. Link to comment
Recommended Posts