caliper id & upgrade advice help. 510 1972

[unseen]

<a href=http://s1199.photobucket.com/albums/aa471/emptino/?action=view&current=IMG_20120307_121438.jpg target=_blank><img src=http://i1199.photobucket.com/albums/aa471/emptino/IMG_20120307_121438.jpg border=0 alt=></a>

 

<a href=http://s1199.photobucket.com/albums/aa471/emptino/?action=view&current=IMG_20120307_120106.jpg target=_blank><img src=http://i1199.photobucket.com/albums/aa471/emptino/IMG_20120307_120106.jpg border=0 alt=></a>

 

<a href=http://s1199.photobucket.com/albums/aa471/emptino/?action=view&current=IMG_20120307_120056.jpg target=_blank><img src=http://i1199.photobucket.com/albums/aa471/emptino/IMG_20120307_120056.jpg border=0 alt=></a>

 

<a href=http://s1199.photobucket.com/albums/aa471/emptino/?action=view&current=IMG_20120307_120041.jpg target=_blank><img src=http://i1199.photobucket.com/albums/aa471/emptino/IMG_20120307_120041.jpg border=0 alt=></a>

 

<a href=http://s1199.photobucket.com/albums/aa471/emptino/?action=view&current=IMG_20120307_120028.jpg target=_blank><img src=http://i1199.photobucket.com/albums/aa471/emptino/IMG_20120307_120028.jpg border=0 alt=></a>

 

<a href=http://s1199.photobucket.com/albums/aa471/emptino/?action=view&current=IMG_20120307_121407.jpg target=_blank><img src=http://i1199.photobucket.com/albums/aa471/emptino/IMG_20120307_121407.jpg border=0 alt=></a>

 

This is whats currently on car? Struts?

 

<a href=http://s1199.photobucket.com/albums/aa471/emptino/?action=view&current=IMG_20120307_152527.jpg target=_blank><img src=http://i1199.photobucket.com/albums/aa471/emptino/IMG_20120307_152527.jpg border=0 alt=></a>

 

<a href=http://s1199.photobucket.com/albums/aa471/emptino/?action=view&current=IMG_20120307_152514.jpg target=_blank><img src=http://i1199.photobucket.com/albums/aa471/emptino/IMG_20120307_152514.jpg border=0 alt=></a>

 

The right rotor slips. It has a good half inch of play. Wheel bearing also moves. Hard to put tire back on. I found the stock calipers & one is bent. Pic below... im guessing this is why the car is in the middle of upgrade?

 

<a href=http://s1199.photobucket.com/albums/aa471/emptino/?action=view&current=IMG_20120307_153358.jpg target=_blank><img src=http://i1199.photobucket.com/albums/aa471/emptino/IMG_20120307_153358.jpg border=0 alt=></a>

 

<a href=http://s1199.photobucket.com/albums/aa471/emptino/?action=view&current=IMG_20120307_153437.jpg target=_blank><img src=http://i1199.photobucket.com/albums/aa471/emptino/IMG_20120307_153437.jpg border=0 alt=></a>

 

 

Stock brackets i believe. Where can i find braxkets for other calipers?

<a href=http://s1199.photobucket.com/albums/aa471/emptino/?action=view&current=IMG_20120307_152850.jpg target=_blank><img src=http://i1199.photobucket.com/albums/aa471/emptino/IMG_20120307_152850.jpg border=0 alt=></a>

 

Im on a rat rod budget. I was going to go back to stock just to get her rolling & stopping. But that bend looks bad?

 

Any advice & help greatly appreciated

 

Thank you :)

[unseen]

I got a box of the above calipers and struts and im trying to fifure the previous owners plan of action. Anyone recognize the calipers and or set up?

 

Which set is better? Cheaper? Brackets?

 

Thanks again :)

[unseen]

[unseen]

 

 

 

Bent stock below

 

Whats on car now...

 

 

 

[unseen]

[datzenmike]

 

It's not bent. They are similar to the ones on my '74 710. The pads are wedge shaped to compensate.

 

 

 

 

.