spudly13 Posted February 25, 2012 Report Share Posted February 25, 2012 Hey guys, im not in too big a rush but im looking for someone in western wa to give me a hand with my dual 38 Su's, ive read through lots of write ups on tuning and everytime i touch them they get worse. At this point im sure everything needs to be re adjusted i know the float level in one carb is off and at a zero start it stumbles and hesitates unless you give it a bit more gas or get the rpms up. Im sure if they were setup properly id get better performance/mileage Im a hands on kinda guy so im not looking to drop it off at a shop for 80-100 bucks an hour but im willing to pay someone to give me a hand Quote Link to comment
banzai510(hainz) Posted February 25, 2012 Report Share Posted February 25, 2012 Bob Harold live up in Stanwood.Does MGs also Hes a SU expert. Or a old VOLVO shop could do this also as they used British SUs also maybe Ray Stonehocker in Bothell I think Quote Link to comment
Sealik Posted February 25, 2012 Report Share Posted February 25, 2012 You should learn how to tune your SUs???? There is lots of info/videos on tuning SUs.....setting float level,....etc. Different carbs...but same process Z Therapy also has a video I believe Quote Link to comment
spudly13 Posted February 25, 2012 Author Report Share Posted February 25, 2012 You should learn how to tune your SUs???? There is lots of info/videos on tuning SUs.....setting float level,....etc. Different carbs...but same process Z Therapy also has a video I believe haha ive been trying! i suppose i could keep trying but like i said i feel like they just keep running worse! Quote Link to comment
spudly13 Posted February 25, 2012 Author Report Share Posted February 25, 2012 The videos make it look easy.... hmm im going to give it another go Can i pick up one of those airflow gauges at any autoparts store? Quote Link to comment
Sealik Posted February 25, 2012 Report Share Posted February 25, 2012 The videos make it look easy.... hmm im going to give it another go Can i pick up one of those airflow gauges at any autoparts store? Yes....watch the video 10 times.... :D Your mixture screw is on the bottom of the SU...not the side as shown in vid. First....You need to sync the carbs with a unisync.....I doubt many auto part stores will have it in stock Order one in...or.. use a hose to your ear and listen to each carb Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.