carterb Posted February 18, 2012 Report Share Posted February 18, 2012 Full set of four 15x7 DOTZ wheels with the 4 x 4.5" (4 x 114.3mm) hole pattern to fit Datsuns and many others. Rims are near perfect with no curb rash. A couple very small imperfections is all you will find. They come with all four centercaps and they have steel lug seats. One centercap logo is slightly discolored compared to the rest. Rims have 15x7 stamped on them but actual rim measures 8"wide. Backspacing is ~ 4 7/8" so they are +7/8" (+22mm) offset. These may work on your Datsun 510, 610, 200sx, S12, early nissan z31 300zx, 240z, 260z, 280z, 280zx, roadster 1600, 2000 and more. Thanks for looking! I am in Lynnwood, WA --carter 425-275-7746 I can ship the the lower 48 for about $20-25/rim. Link to comment
motoliam Posted May 14, 2012 Report Share Posted May 14, 2012 Wish you were closer to SF; I'd totally pick them up from you. Link to comment
dennis Posted May 14, 2012 Report Share Posted May 14, 2012 Most wheels that are 7" width are 8" across. They actually measure where the inside of the lips across. Link to comment
Rjawm Posted May 15, 2012 Report Share Posted May 15, 2012 Just wanted to point out that the second pic says they are +25 offset. That's what the ET 25 means. Oh, and if they where 5 on 4.5 I'd be buying them, haha. Link to comment
carterb Posted May 16, 2012 Author Report Share Posted May 16, 2012 What?! You think the cast in numbers from the manufacturer are more accurate than my tape measure and block of scrap wood?! B) Thanks for the correction! --carter Link to comment
carterb Posted January 11, 2013 Author Report Share Posted January 11, 2013 I'm reviving this thread before I list them on ebay. Here is what they look like on a 510. Link to comment
carterb Posted February 2, 2013 Author Report Share Posted February 2, 2013 Now on ebay with $0.99 starting bid and no reserve! http://www.ebay.com/itm/261164423271?item=261164423271&viewitem=&vxp=mtr Link to comment
Recommended Posts