Oliver Posted January 31, 2012 Report Share Posted January 31, 2012 Anyone know where to get new engine and trans mounts for my 65 320? It has the j13 in it and the mounts are so bad the oil pan is laying on the crossmember. Quote Link to comment
KC Phirus Posted January 31, 2012 Report Share Posted January 31, 2012 Most likely your local fab shop / tech school. Quote Link to comment
metalmonkey47 Posted January 31, 2012 Report Share Posted January 31, 2012 Get some Poly in a tube @ Autozone and make your own! Quote Link to comment
wayno Posted January 31, 2012 Report Share Posted January 31, 2012 Here are engine mounts for a datsun 520 with the J13 engine, these will work as long as the J block engine mount hardware was used on your conversion, if the E1 block hardware was used to mount your J13 engine, then I have not a clue what to tell you. http://www.ebay.com/...=item5647536c61 Now I am not saying that this is a good ebay seller, he/she is rated 99% positive feedback, but this one also does not except returns on some goods. Quote Link to comment
Oliver Posted January 31, 2012 Author Report Share Posted January 31, 2012 wow, those look twice as thick as the ones i have in it now... how can i tell what mounting it has? Quote Link to comment
wayno Posted February 1, 2012 Report Share Posted February 1, 2012 I will try to say this the best I can, the photo with red in it is my 1964 NL320 with an E block(1200), notice how the motor mount is angled , and the motor mount mounting surface is up and away from the fuel pump/fitting. Now look at the other photo without red in it, see how the motor mount mounting surface is near the fuel pump/fitting, and is angled flatter, this is my early 1966 datsun 520 with a J block in it. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.