Sealik Posted November 9, 2011 Report Share Posted November 9, 2011 I'm printing a copy of the pic below to give to my 'machinist'...just so there is no 'confusion' on the ring installation. New NPR 89mm pistons (again) and new Hastings cast iron rings. From my FSM This is correct....correct?.... :D Quote Link to comment
datzenmike Posted November 9, 2011 Report Share Posted November 9, 2011 Looks like my FSM Doug. Quote Link to comment
Sealik Posted November 9, 2011 Author Report Share Posted November 9, 2011 (edited) Looks like my FSM Doug. Yeah......when I pulled No 1 piston out, I noticed that they installed the oil rings (top and bottom) about 1 inch apart. But....I see that they are situated below top ring....and second ring. Being that the thrust direction is the same...front or back of the engine is not of consequence? (relative to pic) EDIT I'll put FRONT OF ENGINE to the left in pic, at 9 o'clock Edited November 9, 2011 by Sealik Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.