paramedicopace Posted October 18, 2011 Report Share Posted October 18, 2011 I have two L16's, one has 15lbs in # 3 and the other has nothing in # 2. I'm over it and just going to do sr20det swap but that means my 510 is off the road alittle longer:( Also have a weber 32/36 on manifold distributor from 78 620(may be a dizzy not sure what that means) and auto trans from a 72 510. Also have stock carb and manifold and a flywheel. the weber is good to go and ran fine. Let me know if intrested weber is $100, motors $50 each, trans $50, dist $40 (has brand new cap, roto, condenser and points). All is obo. Will put pics up tommorow whem there is sun, THANKS. Link to comment
pondking Posted October 18, 2011 Report Share Posted October 18, 2011 How much is shipping an L16 to soCAL? Link to comment
CWhip Posted October 18, 2011 Report Share Posted October 18, 2011 I'm interested in the weber to 98321. Link to comment
paramedicopace Posted October 22, 2011 Author Report Share Posted October 22, 2011 Weber sold!!!! Link to comment
paramedicopace Posted October 22, 2011 Author Report Share Posted October 22, 2011 Sorry for no pics yet first day home, will get some up. Link to comment
datzenmike Posted October 22, 2011 Report Share Posted October 22, 2011 If the distributor, (dizzy) has points it's not from a '78. Nor is it the desirable Electronic Ignition dizzy worth roughly $60 to $80. How complete are the L16 engines? Manifolds, carb, water pump, starter, alternator, ?? Link to comment
paramedicopace Posted October 22, 2011 Author Report Share Posted October 22, 2011 AWWW! Good to know. One motor is complete - a carb. The other has stock carb and air cleaner, exhaust manifold (not attachedat this time) with a double point distributor and water pump. One is set up for auto and other is manual. Have only one starter. Car came with the motor that has a low #3 cylinder and Purchased the other motor to replace with. Can make one or the other complete though. Shipping I looked into and is around $250 to $300 to get a truck to pick up from residence. Link to comment
MYDAILYROUTINE Posted October 23, 2011 Report Share Posted October 23, 2011 I'm interested in the stock carb. I take it that it needs a rebuild? How much? Link to comment
paramedicopace Posted October 23, 2011 Author Report Share Posted October 23, 2011 Will part out if need be as well. I just dont want to scrap good Datsun metal. Link to comment
South califas Posted November 2, 2011 Report Share Posted November 2, 2011 Hey do u have the flex plate for the automatic trans and if so how much with shiping to southern cali email me gnicols76@yahoo.com Link to comment
paramedicopace Posted November 2, 2011 Author Report Share Posted November 2, 2011 PMed Link to comment
South califas Posted November 3, 2011 Report Share Posted November 3, 2011 Hey i was wondering i have an l18 motor will ur flex plate from ur l16 motr fit my l18???? Also email me so i can email back Link to comment
kelrich Posted November 5, 2011 Report Share Posted November 5, 2011 How much is shipping an L16 to soCAL? Got an l16 in so cali 200 here it run. no smoke good motor and auto trans Link to comment
albyneau Posted November 20, 2011 Report Share Posted November 20, 2011 I have two L16's, one has 15lbs in # 3 and the other has nothing in # 2. Sounds possible that both have some serious internal damage. Have either been disassembled/inspected? Broken valves, holy pistons/cylinder walls, etc..? Link to comment
datzenmike Posted November 20, 2011 Report Share Posted November 20, 2011 Hey i was wondering i have an l18 motor will ur flex plate from ur l16 motr fit my l18???? Also email me so i can email back Yes the L16 flex plate will bolt on. Just beware that there were at least three automatics used on the L16 and although the mounting bolts and the starter ring gear are in the same place the torque converters were very different and may bolt to the flex plate differently. If it was from a very late (04 '71 510 or newer) it will work. Earlier ones I don't know. Get pictures of it and compare Link to comment
paramedicopace Posted January 4, 2012 Author Report Share Posted January 4, 2012 Giving everything away to a good ratsuner MY DAILY ROUTINE. He wil take care of it all. Just don't want the Sun Valley front yard anymore, HAHAHA. 1 Link to comment
paramedicopace Posted January 4, 2012 Author Report Share Posted January 4, 2012 Also a little help on my -1 rep because it wasnt worth it to ship a tired L16 to So Cal, sorry but just not worth it at $450 shipping to the buyer, I can't do that to a fellow ratsun member!!!!! Get a KA. Sorry it didn't work out but you live in So Cal there is a very plentiful stock of L16's i'm sure, I used to live there. Thanks!!!!!!! Link to comment
MYDAILYROUTINE Posted January 5, 2012 Report Share Posted January 5, 2012 Thanks man! Everything will definitely be put to good use. I will have to text you tomorrow about my schedule because the store manager was out sick today and hasn't posted the upcoming schedule. Can't wait to see how your 4 door is coming along! Thanks again, you sir are a gentleman and a scholar. :cool: Link to comment
MYDAILYROUTINE Posted January 7, 2012 Report Share Posted January 7, 2012 Thanks for the motors, trans and random L series parts you gave me today! It was cool to hang out for a quick minute and see what you have going. Your 510 is comin along nice and if you ever need a hand or someone to drink your beer, call me. I even made it to work with 5 minutes to spare! :cool: You sir, are awesome in my book. Link to comment
spl310 Posted April 19, 2012 Report Share Posted April 19, 2012 If the trans is a Borg Warner auto, I need the dipstick and tube!! Link to comment
Recommended Posts