nick-dime Posted September 13, 2011 Report Share Posted September 13, 2011 Hi, I am trying to put a mikuni single side draft on a 1971 510, where can I buy a throtle cable and how to hook it up, also where can I buy the linkage for Lynx manifold Quote Link to comment
GUS-GUS Posted September 13, 2011 Report Share Posted September 13, 2011 I'm not sure if this will help but Troy's kit worked fine on my dual side drafts. (Scroll all the way down) http://www.ermish-ra...onlinestore.cfm Quote Link to comment
nick-dime Posted September 13, 2011 Author Report Share Posted September 13, 2011 I'm not sure if this will help but Troy's kit worked fine on my dual side drafts. (Scroll all the way down) http://www.ermish-ra...onlinestore.cfm would a single side draft mikuni be worth putting in a 510, since I plan on it being a daily driver (70 miles/day) Quote Link to comment
izzo Posted September 13, 2011 Report Share Posted September 13, 2011 I ran a single side draft on my L20, it was over jetted and ran like crap. You can run a single if its jetted right. But the #1 and #4 will run slightly lean due to it being further the air/fuel have to travel. Thats not to say you can't tune it and get it to run fine, and still haul ass. But dual side drafts would create and equal length for the air/fuel to flow eliminating this problem. Freaky510 runs a single side draft on his 510. Thing runs like a raped ape, hauls ass - Lots of power. Quote Link to comment
nick-dime Posted September 13, 2011 Author Report Share Posted September 13, 2011 I ran a single side draft on my L20, it was over jetted and ran like crap. You can run a single if its jetted right. But the #1 and #4 will run slightly lean due to it being further the air/fuel have to travel. Thats not to say you can't tune it and get it to run fine, and still haul ass. But dual side drafts would create and equal length for the air/fuel to flow eliminating this problem. Freaky510 runs a single side draft on his 510. Thing runs like a raped ape, hauls ass - Lots of power. I also have a dual mikuni manifold, would the car be good for a daily driver? I have an l20b w/ an A87 head Quote Link to comment
izzo Posted September 13, 2011 Report Share Posted September 13, 2011 Don't see why you couldn't daily drive it once you got it dialed in and tuned. Would be good performance and fun, economical and gas friendlier would be a 32/36. I'm running an l20 with u67 head and a 32/36 as my daily driver. Quote Link to comment
Burabuda Posted September 13, 2011 Report Share Posted September 13, 2011 I'm not sure if this will help but Troy's kit worked fine on my dual side drafts. (Scroll all the way down) http://www.ermish-ra...onlinestore.cfm @gus this is a center pull yes? how long is the cable? pix of your setup? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.