jchristians Posted August 2, 2011 Report Share Posted August 2, 2011 Trying to bleed my brake system (actually on my 521). I have a 620 dual reservoir and I am having problems getting an airtight seal w/ the cap that goes to my pressure bleeder. Any idea what the little bleeder screws on the side of the 620 are for? Can i attach my p bleeder and push air thru the system thru those, or are those just to empty out the reservoir bottles? Any help appreciated! thanks! Quote Link to comment
datzenmike Posted August 2, 2011 Report Share Posted August 2, 2011 I've removed your double post on the same subject. Quote Link to comment
jchristians Posted August 2, 2011 Author Report Share Posted August 2, 2011 oops, sorry bout that! Didn't know that was not acceptable. Quote Link to comment
grant Posted August 5, 2011 Report Share Posted August 5, 2011 is your's a reverse bleeder? Quote Link to comment
ggzilla Posted August 5, 2011 Report Share Posted August 5, 2011 Any idea what the little bleeder screws on the side of the 620 are for? Those are for bleeding the master. Do that BEFORE you bleed the wheel cylinders. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.