Burabuda Posted July 26, 2011 Report Share Posted July 26, 2011 anybody got a couple of these they can sell me? (pink circle for nohomo) Link to comment
oldskoolvws Posted July 27, 2011 Report Share Posted July 27, 2011 anybody got a couple of these they can sell me? (pink circle for nohomo) http://www.wolfcreekracing.com/index.php?option=com_content&view=article&id=21&Itemid=30 Link to comment
Burabuda Posted July 27, 2011 Author Report Share Posted July 27, 2011 ^ thx but i checked with them 1st before i posted here Link to comment
Rotary510 Posted July 27, 2011 Report Share Posted July 27, 2011 Hey I have a rare MIKUNI PHH Carburator Service Manual with me. The original 1979 book with part numbers, names, etc...Interested in it? PM me! I will sell it to you for only $20.00 Shipped!. This should be a huge help with your project. Link to comment
Burabuda Posted July 27, 2011 Author Report Share Posted July 27, 2011 ^ if you sell me the parts i missing sure i'll buy your rare manual Link to comment
67411sss Posted July 28, 2011 Report Share Posted July 28, 2011 I have some. I will have to check later. I'll PM you later. Link to comment
grey510 Posted July 29, 2011 Report Share Posted July 29, 2011 Can you tell me what side of the carb you need them for as they are made for a specific side.......looking from the front of the carb.....the typical setup is for a left and right combo so you can run a single accelerator cable from the middle.....although I have also seen some manifolds require you to run a long shaft with two rod ends screwed right above the linkage as well.......I have some spares but i need to know how you want to set up to work..... Thanks, Link to comment
Burabuda Posted July 29, 2011 Author Report Share Posted July 29, 2011 my setup needs to be like this: Link to comment
oldskoolvws Posted August 7, 2011 Report Share Posted August 7, 2011 Not Mikuni, but these guys might be able to help too, I just ordered a bunch of SK replacement parts: http://www.zccjdm.com/catalog.php/azcarbum/dt84844/O.E.R._Replacement_parts_SK_OER_ Link to comment
Recommended Posts