Newbee Posted July 25, 2011 Report Share Posted July 25, 2011 Hey, I am rebuilding my rear suspension and wondered if anyone knows why the bearing part numbers are called out as RW101 for the inner wheel bearing and RW125 for the outer wheel bearing??? when I removed the original bearings they are the same size?? anyone know if the part numbers are correct? Quote Link to comment
philcas1987 Posted July 25, 2011 Report Share Posted July 25, 2011 One has no seals one has seals. Rw101 is what I went with. Take seals out. Both same size. Just hope you didn't mess up the threads on the axle. And buy new nuts from Nissan Quote Link to comment
south of reno Posted July 25, 2011 Report Share Posted July 25, 2011 Do you have the new bearings? I've seen them on eBay for the 510. Quote Link to comment
zerow Posted July 25, 2011 Report Share Posted July 25, 2011 Ask and ye shall receive: Rear Wheel Bearings = Timken 6206 4 Required (These bearings are permanently sealed, and can be found through a bearing supply house, use 6206 or 6206-2RS) Rear Wheel Seals = Timken 224045 2 Required Rear Wheel Locknuts = Nissan P/N 43262-21000 2 Required Quote Link to comment
Newbee Posted July 27, 2011 Author Report Share Posted July 27, 2011 AWESOME!! Thanks for the info. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.