Jump to content

510 locks


Recommended Posts

So I have this collection of locks and keys that I bought a few years back.

Some of you might have seen, and had the pleasure of, sitting and trying to match keys to locks. :no:

 

I was in the process of trying to put together a few complete sets, (ign, both doors, trunk and gas door), when i ran into some barrels that only have three little grooves while others have four. this difference is in trunk, gas door and door locks.

 

Picture194-1.jpg

I would like to know if these changes are year/model specific.

 

I have a 72 four door. The locks have all four grooves on all the locks.

 

What do you have??

Link to comment
  • Replies 13
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Isn't that rad when you put the wrong key in and turn it, and it locks the key and won't let you turn it back out?

Just had that problem with an ignition switch. almost broke the key in there but got it out.

Looked like a good fit at first.

Link to comment

i pulled a set out a JY 210 that look the same and fit.

 

 

ill have to take a look this weekend.

Thanks man.

For a second there I thought I wasn't going to get a reply :angry:

 

I know someone had to replace their locks before.

I just finished mine last night. Finaly, I can lock the doors (car didn't come with keys) and have one key for all :D

 

Anybody else?

Link to comment

Here's a few pics of my collection.

 

IMG_07751.jpg

IMG_07761.jpg

 

 

on the pic below, the top one is from a 510/Z

the bottom one mounts on a skinnier steering column.

any ideas where that one is from?

I have two of the smaller ones, one has the same switch in the back(48750-E7705)as 510/Z with two screws

the other small one has one that"s small with only one screw

Again, any ideas??

 

IMG_07771.jpg

Link to comment

Is it possible to flip the ignition around the column so it is on the right side? The steering column lock would probably stop working...

 

on the 510, if you flip the switch, the steering column lock would stop working.

Also,

510 and Z ign switches are the same, they are symmetrical and all you need to do is flip the little faceplate.

Link to comment

are u interested in selling any of the door locks u have? i need just doors. have a trunk one already

 

yeah, I am selling these. All refurbished with new key

 

Ignition switch, two door locks, one trunk lock, one gas door lock, one key

$220

 

Ignition switch with key

$100

 

Lock with key

$40

 

I have a few hatch locks also, if any one needs a set for a wagon.

And I have two 240z hatch locks too

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.