Jump to content

SKFURY's 260z 2+2 build


Recommended Posts

In the summer of 2008 I wrecked my 1995 Ford Probe after a long night of no sleep and rainy conditions. After looking for about 2 weeks I found a beautiful 1992 Jamaica Yellow Firebird. I drove the car around and loved it until while at a small car show i was offered a 1992 240sx coupe se for trade. So I did it. He didnt have the title yet so I held on to mine as well. Good thing because as it turned out he owed 1300 dollars on the car. So I found a buyer for the 240sx. Sold it for 3500 and paid it off. Took the remaining 2200 on a 1988 10th anniversary rx7. I drove it and loved it more than I had loved any other car that I had ever owned. Then the coolant seals blew. I traded the Rx7 back for the Firebird. I drove the firebird for a while again and then was offered a 1985 Mercury Cougar as well as a 1987 Conquest TSI. Obviously I traded. The Conquest is still sitting in Jacksboro as I write this. So Im driving a POS cougar for a while and the motor gives. I took the car to the junkyard and got 298 dollars. I took that money and purchased another 240sx coupe se. Put around 200 in it and got running smooth. I promptly traded the car for a 1990 240sx Hatchback. I soon traded that 240sx for a 1988 Supra turbo. The mainbearings were shot so I traded for a 1995 Honda Civic Hatchback. I promptly sold the Civic (I hated it) and bought another 240sx Hatch. Only having the new 240sx Hatch for 2 months or so I was offered a beautiful 1974 Datsun 260z 2+2. I was in Georgia the next day.

 

When I got the car it ran a little rough because the fuel system was trashed. I got a couple of 240z carbs and slapped them on and almost instantly it felt like a different car. So responsive and it felt amazing. Then my lust for power set in. I made a plan to swap in something that had never been swapped before. A Mazda Turbo Rotary. After several set backs that idea was scrapped. Then a light at the end of the tunnel. I was offered a 300zx Turbo (the full car) for 200 dollars. I jumped on it. From the car I am pulling the engine,transmission,rearend,hubs,rotors,calipers and rims to use on my car. I also will be stripping the 300 for parts to sale. Hood,fenders,lights,bumpers,some interior pieces, and the suspension.

 

180097_193224664034794_100000417860506_627799_4490708_n.jpg

 

180097_193224670701460_100000417860506_627801_938055_n.jpg

 

181947_193225220701405_100000417860506_627812_4457786_n.jpg

 

182770_193225784034682_100000417860506_627819_1808173_n.jpg

 

180097_193224677368126_100000417860506_627803_5215523_n.jpg

 

181947_193225227368071_100000417860506_627814_8102631_n.jpg

 

182770_193225794034681_100000417860506_627821_3514150_n.jpg

 

180507_193225954034665_100000417860506_627822_4894642_n.jpg

 

182770_193225790701348_100000417860506_627820_3509370_n.jpg

 

180097_193224674034793_100000417860506_627802_8185207_n.jpg

 

182770_193225777368016_100000417860506_627817_971036_n.jpg

 

181947_193225230701404_100000417860506_627815_6099411_n.jpg

 

182770_193225780701349_100000417860506_627818_5353168_n.jpg

 

 

Link to comment
  • Replies 10
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

It really depends. This one of the few cars ive had on my wish list for a long time. There are only two cars i would ever trade this for and finding them is rare. So probably a long long time. The only 2 cars I would trade for would be a 2 door 510 or an old school Mazda RX4

Link to comment

Yes there are several 510s but there is one in particular that i want. It belongs to a friend of mine here in knoxville. Its a 1969 I believe. But it has a carbed Mazda 13b rotary motor. I probably will stick with this datsun. Most of my trades have sadly been out of necessity

Link to comment

Personally I would part out the Z31 and put some straight six power in the 260. I don't know that the VG30 would be a worthwhile swap. It might turn out great, but I don't see it. All the other Z31 stuff should work great on the 260 though. Two piston calipers up front, CV axles in the rear w/ disks and classic Datsun style... my kind of project.

Link to comment

Im going to stick with the VG30ET mostly because its only been done a hand ful of times and sets the car up basically as a Front Mid-engine vehicle allowing for more work space. The VG30ET also has a better head design allowing for better airflow and a higher power threshhold

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.