garageTuned Posted January 19, 2011 Report Share Posted January 19, 2011 I have a new project coming up and I thought I would check here for parts before digging through the snow and cold at salvage yards. Im looking for throttle conversion parts for a 510. Gas pedal and cable. PM me if you can help out. Link to comment
CorAce Posted January 19, 2011 Report Share Posted January 19, 2011 what carb setup are you using? I built a nice system out of saturn parts but it only works with SU's. Link to comment
freaky510 Posted January 19, 2011 Report Share Posted January 19, 2011 http://www.jegs.com/i/Lokar/625/TC-1000U/10002/-1?CT=999 your best bet for the money easy to make it work with a few mods. Its not to hard to do Link to comment
banzai510(hainz) Posted January 19, 2011 Report Share Posted January 19, 2011 use the cable in above link and weld the pc to the 510 pedal at top. Link to comment
freaky510 Posted January 19, 2011 Report Share Posted January 19, 2011 use the cable in above link and weld the pc to the 510 pedal at top. no welding needed it will all bolt together Link to comment
garageTuned Posted January 19, 2011 Author Report Share Posted January 19, 2011 awesome.. thank you. Link to comment
Chris#51EPGraham Posted January 23, 2011 Report Share Posted January 23, 2011 I built 2 different versions out of Toyota cables and parts. The bellcranks tend to interchange assuming your Weber or whatever has an M8 shaft with 2 flats. Requires making/adapting a return spring anchor and cable stop. Link to comment
WRR Posted January 24, 2011 Report Share Posted January 24, 2011 Chris, I have used the Lokar TC1000U setup on many 510's including my FP 510 and never had a failure. As a matter of fact I bought two of them for my racecar 12 years ago and the spare is still in the original packaging. You use the stock pedal setup too. Just drill out the stock ball on the upper pedal arm and drill out the ball or other feature on the carb side. Make a or use the Weber cable anchor and that is it man! it is totally adjustable and very well made. Good luck! Steve Estrada Link to comment
WRR Posted January 24, 2011 Report Share Posted January 24, 2011 Oh, I forgot to tell you to use all of the Lokar hardware! Link to comment
garageTuned Posted January 26, 2011 Author Report Share Posted January 26, 2011 Thanks for all of the advice! Maybe I should make a regular post about the project and introduce myself... just been too busy lately. Link to comment
Recommended Posts