5casey1dimer0 Posted November 23, 2010 Report Share Posted November 23, 2010 I have done some searching around and couldn't find what v styled pully works when using the saturn IR alternator. I have seen mentioned a few times to ask a local parts store if the had any pullys laying around, and every place said no. I am wondering if there is a known pully that will fit on saturn alternator everyone uses, so i can easily pull one at pick a part, or even buy one online or at napa or something. Thanks guys! btw doing this on my l16 in my 510. Quote Link to comment
Braden Posted November 23, 2010 Report Share Posted November 23, 2010 umm try your pulley off your old alternator, you might have to use a washer as a spacer. i went down to my local alt rebuilders and got a core for my saturn alt swap as well as a pulley, if you really really need me too i might be able to stop by down there and pick you up a few pulleys, just pay shipping. Quote Link to comment
5casey1dimer0 Posted November 23, 2010 Author Report Share Posted November 23, 2010 umm try your pulley off your old alternator, you might have to use a washer as a spacer. i went down to my local alt rebuilders and got a core for my saturn alt swap as well as a pulley, if you really really need me too i might be able to stop by down there and pick you up a few pulleys, just pay shipping. I did, it wouldn't fit over the alt's shaft. I don't have the proper tools to drill it out dead on center, i would have a wobbly pully haha. Thanks for the offer, I will take you up on it if all else fails. I wish i had the time to just browse through a junk yard, I happen to work the same hours most are open. . . :( Quote Link to comment
Braden Posted November 23, 2010 Report Share Posted November 23, 2010 dude i can totally run by the place and pick you one up, they have huge piles of alternators and pulleys and stuff Quote Link to comment
5casey1dimer0 Posted November 23, 2010 Author Report Share Posted November 23, 2010 dude i can totally run by the place and pick you one up, they have huge piles of alternators and pulleys and stuff Haha well sure then, if its not too much trouble. Let me know what shipping is and I can paypal you? Still curious as to what pulley is known to fit, for reference. Quote Link to comment
Braden Posted November 24, 2010 Report Share Posted November 24, 2010 shit i dont know soem older vehicle? a jeep 4.0 or a small block? i just picked mine out of a pile about the size of a big rig trailer Quote Link to comment
]2eDeYe Posted November 24, 2010 Report Share Posted November 24, 2010 GM AC Delco V-groove pulley. 1980's All over the pull-a-parts. Quote Link to comment
5casey1dimer0 Posted November 24, 2010 Author Report Share Posted November 24, 2010 shit i dont know soem older vehicle? a jeep 4.0 or a small block? i just picked mine out of a pile about the size of a big rig trailer Oh, got ya. Well let me know if you wouldn't mind seeing if you can find a few that might work, I have no problem picking up shipping charges, even a few bucks for your time. PM me if you want. 2eDeYe' date='23 November 2010 - 07:06 PM' timestamp='1290567979' post='382993']GM AC Delco V-groove pulley. 1980's All over the pull-a-parts. Thanks man, If i can find the time, I will go hunting for one! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.