SunnyDaze Posted November 1, 2010 Report Share Posted November 1, 2010 I have a 60 series 5speed (FS5W60A) and a 120y (B210) coupe. I need a crossmember to install. Anyone have any tips for this conversion? I've got a B310 crossmember that came with the box that might work with a spacer and some new holes. Did any B210 came out with the 60 series anywhere in the world that I could use the crossmember. Thanks Quote Link to comment
datzenmike Posted November 1, 2010 Report Share Posted November 1, 2010 B-210s had the FS5W63A dogleg until '78? when it became the 210?- Quote Link to comment
az_rat210 Posted November 5, 2010 Report Share Posted November 5, 2010 I ran into the exact same problem. The 5-Speed Rear Mount did not fit my 75 B210, so I used the 4-Speed Mount with 1/2" or 1" spacers to get it closer to the correct height. The 4-Speed had a mount height of 1" but the 5-Speed (FS5W60A) has a mount height of 2". I am running from memory here and would have to get under the car to check it, but I think the above is accurate. I plan on taking it to a shop and asking someone to make up a bracket that will have the engine at the correct angle. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.