84TAVeRT Posted January 13, 2008 Report Share Posted January 13, 2008 i just ordered some stuff for my 620... rockauto.com has beck arnley 620 carrier bearings for $52 ... that is about half of everywhere else... their site says they only have 8 left at that price... just spreading the word to the ratsun community... later, Chris Quote Link to comment
phatdave Posted January 13, 2008 Report Share Posted January 13, 2008 I need one and that IS a good price. THANKS!!! Quote Link to comment
Cruzn620 Posted January 13, 2008 Report Share Posted January 13, 2008 will be ordering mine on tuesday...thanks for the heads up! Quote Link to comment
hitch Posted January 17, 2008 Report Share Posted January 17, 2008 Thanks, Needed one, ordered one. Quote Link to comment
reese Posted February 8, 2008 Report Share Posted February 8, 2008 Has anyone installed this? Is it pressed onto the end of the driveshaft? Was it difficult to remove? Any info would be great..I am about to do this so and dont want any surprises.. Quote Link to comment
84TAVeRT Posted February 8, 2008 Author Report Share Posted February 8, 2008 i havent installed mine yet... i am waiting to see if i need a transmission... if i need a trans... it will depend on what i get as to whether i put it on the long front shaft or the short one... i have both because i had an auto in the truck at one time... also, i am gonna have a driveshaft place do the assembly, because i need all of the u joints replaced and don't have the time to do it myself... Quote Link to comment
subedats Posted May 11, 2008 Report Share Posted May 11, 2008 damn they dont have any left I dont think.. any where else that is pretty cheap.. Quote Link to comment
reese Posted May 11, 2008 Report Share Posted May 11, 2008 $73 at Parts America http://www.partsamerica.com/productdetail.aspx?MfrCode=SKF&MfrPartNumber=HB128010&PartType=907&PTSet=A Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.