71dime Posted August 4, 2010 Report Share Posted August 4, 2010 i was wonderin if anyone can shed some light on this subject. Do i have to run the lame ass intake tube that puts the mass air on the drivers side or can i just shorten the wires and dump it to the right. Ive asked a few people but know one has given a clear answer so far. Someone told me it has to be a certain distance from the t.b. but i wanna get the right answer before i start modifyin stuff Quote Link to comment
Skib Posted August 4, 2010 Report Share Posted August 4, 2010 I dont see why you couldnt Quote Link to comment
DISLEXICDIME Posted August 4, 2010 Report Share Posted August 4, 2010 the reason they run the long pipe is because they say you need 12" of strait pipe between the sensor and the intake so the mas reads right. if it is to short it can cause turbulence and not read right. Quote Link to comment
lynchfourtwenty Posted August 4, 2010 Report Share Posted August 4, 2010 the setup in the picture skib posted looks fine, but ya i've always heard the same thing that dislexicdime said.. i have a crappy ebay intake on my car right now an i think its causin me to lose some top end.. Quote Link to comment
71dime Posted August 5, 2010 Author Report Share Posted August 5, 2010 alright thanks i was gonna do it just like his pics anyways i just gotta make sure its atleast 12 inches that should be easy enough Quote Link to comment
71dime Posted August 5, 2010 Author Report Share Posted August 5, 2010 I dont see why you couldnt Quote Link to comment
71dime Posted August 5, 2010 Author Report Share Posted August 5, 2010 what radiator and fan setup are u runnin in that pic? Quote Link to comment
DISLEXICDIME Posted August 6, 2010 Report Share Posted August 6, 2010 That's not a datsun. Quote Link to comment
71dime Posted August 11, 2010 Author Report Share Posted August 11, 2010 what size pipe should i use for the new intake? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.