ILWU82553 Posted March 3, 2010 Report Share Posted March 3, 2010 ok maybe im just not using my brain all the way but i cant seem to get my tach to work in my 510 with a ka swap... I have it grounded, power hooked up from ignition, and i hooked the wire that is supposed to go to the coil or the electronic ignition to the tach wire coming out of my ecu... and nothing.... Anybody have any experience with this swapo and doing a tach??? Quote Link to comment
sssr20det510 Posted March 3, 2010 Report Share Posted March 3, 2010 http://community.ratsun.net/topic/537-how-to-wire-a-ka-sr-ca-into-anything/ Quote Link to comment
Icehouse Posted March 3, 2010 Report Share Posted March 3, 2010 Is it a factory Tach? Does it have 2 white wires coming out of the back? If so you need to run the coil POWER through that wire. Quote Link to comment
sssr20det510 Posted March 3, 2010 Report Share Posted March 3, 2010 i think its aftermarket look at his photos in his profile Quote Link to comment
slinginabullet Posted March 3, 2010 Report Share Posted March 3, 2010 I had the same issue I just tapped into the coil wire it self Quote Link to comment
ILWU82553 Posted March 3, 2010 Author Report Share Posted March 3, 2010 its an autometer 5 inch ultra lite tach Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.