72datsun Posted September 18, 2009 Report Share Posted September 18, 2009 Hi, im in need of the front hardlines with the tee adapter mounted on the firewall also leads to the slave cylinder i believe. Local would be good, Oregon. took my cab off and these lines where hard to take off so i cut them to save time since my truck sits outside and summer is over now. LMK Link to comment
72datsun Posted September 20, 2009 Author Report Share Posted September 20, 2009 anyone? Link to comment
72datsun Posted December 14, 2009 Author Report Share Posted December 14, 2009 i still need these too. i got a distribution block for the lines. i just need the brake hard lines now. Link to comment
koback68 Posted December 14, 2009 Report Share Posted December 14, 2009 They are a little long.But they cost $3.00 Link to comment
DanielC Posted December 14, 2009 Report Share Posted December 14, 2009 The 521 just uses standard American threads on the brake line fittings. Get the ready made ones at just about any auto parts store. Link to comment
72datsun Posted December 14, 2009 Author Report Share Posted December 14, 2009 The 521 just uses standard American threads on the brake line fittings. Get the ready made ones at just about any auto parts store. ok ill try em. ive seen them at the parts store too. Link to comment
72datsun Posted December 22, 2009 Author Report Share Posted December 22, 2009 still looking.. im not very good a bending the lines they sell at theauto stores. anyone have these? Link to comment
72240z Posted December 22, 2009 Report Share Posted December 22, 2009 Practice makes perfect. Link to comment
jefe de jefes Posted December 22, 2009 Report Share Posted December 22, 2009 tubing bender at harbor freight is cheap as well. Link to comment
Recommended Posts