philip1 Posted August 1, 2009 Report Share Posted August 1, 2009 I would build my own but if I can find a factory piece that would be best Link to comment
philip1 Posted August 2, 2009 Author Report Share Posted August 2, 2009 does anyone on here have a naps-z turbo manifold? I will consider almost any turbo manifolds for this engine. Link to comment
kiznook Posted August 2, 2009 Report Share Posted August 2, 2009 It's going to be a difficult search. Good Luck! might be easiest to build your own log manifold http://jgsturbo.com/index2.html Link to comment
datzenmike Posted August 2, 2009 Report Share Posted August 2, 2009 I'll take one too!!!! They only came on the JDM Z18ET. Lots of cars in Oz and area with them on. The CA18ET is.... similar. Maybe if close enough, two adapter plates could mate it to the Z head?? Link to comment
philip1 Posted August 3, 2009 Author Report Share Posted August 3, 2009 (edited) if I make another one I'll make a fixture so several can be built. BTW I have Already built one but like an idiot I sold it before making the fixture. I used 1/2 inch flanges and all the pipes were 1/4 wall so this thing was plenty stout and it did fit as i built it on the 510. Edited August 3, 2009 by philip1 Link to comment
FJDatto Posted August 5, 2009 Report Share Posted August 5, 2009 Ahem.... http://forum.ratsun.net/showthread.php?t=13804 Link to comment
Recommended Posts