mx71 Posted January 3, 2018 Report Share Posted January 3, 2018 I got a squeal in my pump and I've got my new one coming today, but I can't get the reservoir separated from the pump. Is there something I'm missing? I don't see anything holding it on. Quote Link to comment
flatcat19 Posted January 3, 2018 Report Share Posted January 3, 2018 Since you didn't provide pics, I went and looked at pics from RockAuto. It looks like there are bolts? that hold it in. Or is that where the return line goes. If not, it's held in by an o-ring. GL. Quote Link to comment
mx71 Posted January 3, 2018 Author Report Share Posted January 3, 2018 All bolts are removed. Both lines are removed. I also looked at the diagrams. 1 Quote Link to comment
flatcat19 Posted January 3, 2018 Report Share Posted January 3, 2018 How many o-rings came with your kit? Should be one for the return fitting and one for the bottle. Two washers for the pressure line. 1 Quote Link to comment
mx71 Posted January 3, 2018 Author Report Share Posted January 3, 2018 I found it. There were two additional bolts I missed that were caked in mud/other stuff. Also, turns out that the reservoir extends all the way down to the bottom of the pump, rather than just sitting on top like I thought it did. 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.