worksnaDELUXE Posted October 1, 2015 Report Share Posted October 1, 2015 So the my buddy that had the car before me took off all the headlight trim and got the car painted. In doing so the hood holes where the trim screws go are filled up. Any idea's on how I should install the hood trim? Glue? Drill out the holes? I'm putting the trim on either way bc I don't like 510 fronts without it. Thanks in advance! Quote Link to comment
Doctor510 Posted October 1, 2015 Report Share Posted October 1, 2015 Look inside and drill out! Quote Link to comment
worksnaDELUXE Posted October 1, 2015 Author Report Share Posted October 1, 2015 Look inside and drill out! You don't think it will crack the paint? I was thinking that...is there a certain bit I should use? Diamond, etc..? Quote Link to comment
TENDRIL Posted October 1, 2015 Report Share Posted October 1, 2015 use a pick, push it through. it shouldn't crack if it is painted properly 1 Quote Link to comment
worksnaDELUXE Posted October 1, 2015 Author Report Share Posted October 1, 2015 I'll let you know how it turns out haha Quote Link to comment
Doctor510 Posted October 1, 2015 Report Share Posted October 1, 2015 Tape the out side first and use a pick as Tendril said, go slow. put the trim piece up there and follow the holes. 1 Quote Link to comment
zianian Posted October 21, 2015 Report Share Posted October 21, 2015 I'll let you know how it turns out haha And don't f-ing scratch my paint. ;) Quote Link to comment
worksnaDELUXE Posted October 21, 2015 Author Report Share Posted October 21, 2015 And don't f-ing scratch my paint. ;) Ba haha we'll see, if we trade, I'll let you install all of it. :w00t: Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.