jeremyd72 Posted June 18, 2014 Report Share Posted June 18, 2014 Hello, I am slowly gathering parts to do a ka24e swap in my 210. For those that have done it, how much of the wiring harness do I need? All of it under the hood and through to the inside under the dash? The 240sx guys that are swapping theirs out won't let their harnesses go, since they need them for what ever they are putting in. There are several ka24e hardbodys at the pick and pull so I will probably go that way. Just wondering about the harness, it looks like a pain to get it all, at least in the hardbodys. Thanks, Jeremy Quote Link to comment
ggzilla Posted June 18, 2014 Report Share Posted June 18, 2014 You need the entire 210 wiring harness. And the KA engine harness up to and including the ECU. Quote Link to comment
CWhip Posted June 18, 2014 Report Share Posted June 18, 2014 Just the upper and lower engine harness and ecu. You won't need any wiring from the interior. And I'm not sure about the compatibility of the hardbody wiring vs 240 so really research that. Quote Link to comment
jeremyd72 Posted June 19, 2014 Author Report Share Posted June 19, 2014 OK. Thanks. I'll keep that in mind. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.