hardbodylove Posted March 23, 2014 Report Share Posted March 23, 2014 I was wondering if it was safe to run only one nut on the torsion bars because there's two of them when adjusting them to go up or down? Quote Link to comment
TENDRIL Posted March 23, 2014 Report Share Posted March 23, 2014 i would not risk it. Quote Link to comment
Farmer Joe Posted March 23, 2014 Report Share Posted March 23, 2014 wouldnt recommend it, but its not just gonna break if it only has one. if anything, it will just loosen up on its own after a very long time.. the second is just a jamb nut for the bigger nut. 1 Quote Link to comment
hardbodylove Posted March 23, 2014 Author Report Share Posted March 23, 2014 OK thanks for the info guys farmer how are running the air shocks in the rear do you have a little compressor in your truck Quote Link to comment
Raggleflaggle Posted March 24, 2014 Report Share Posted March 24, 2014 the military uses this picture as an example of unsafe vehicle support... Question is, is that a Datsun? Quote Link to comment
Farmer Joe Posted March 24, 2014 Report Share Posted March 24, 2014 OK thanks for the info guys farmer how are running the air shocks in the rear do you have a little compressor in your truck they were good till i broke a leaf spring last time. kinda tweaked one of the shocks, and it doesnt hold air anymore. since then the lines have been ripped out.. Quote Link to comment
ggzilla Posted March 24, 2014 Report Share Posted March 24, 2014 > the military uses this picture as an example of unsafe vehicle support... Question is, is that a Datsun? Doubt it. Datsun owners can generally afford genuine 55-gallon drums to support the vehicle. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.