angelmanuel Posted March 22, 2014 Report Posted March 22, 2014 is there a 15/16 master cylinder that mounts vertically (mounting bolts up and down instead of side by side) like the one on a B310? i got one from a 280ZX but it mounts horizontally. i am trying to modify it but i think i am taking too much material off and it will crack. this cylinder is going on a B310 by the way. Quote
CWhip Posted March 22, 2014 Report Posted March 22, 2014 I'm running zx front brakes and a H-165 disk rear end with the stock 13/16" mc and it's working just fine. I did get a 7/8" mc for the disk/disk proportioning valve though and just installed the rear one. I was pretty much just copying what the 510/620 guys have done. Quote
angelmanuel Posted March 22, 2014 Author Report Posted March 22, 2014 might have to go that route i gues Quote
CWhip Posted March 23, 2014 Report Posted March 23, 2014 Forgot to mention that the 7/8" mc came out of a 200sx that was disk/disk Quote
angelmanuel Posted March 23, 2014 Author Report Posted March 23, 2014 maybe the best option will be to use that 7/8" Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.