510Craven Posted July 3, 2013 Report Share Posted July 3, 2013 From reading I understand that on the stock manifold one could remove the egr system and put the 02 sensor where the egr tube went. My question is how exactly is this done? My 02 sensor cannot thread where the egr tube went because the hole is to big. Is their a fitting I can buy and put in their? Any pictures would be helpful thanks Original 02 sensor hole ^^^ does this thread piece come out and... And go here? ^^^ Sorry for the bad pics I took them while I was test fitting the engine. Quote Link to comment
jesusno2 Posted July 3, 2013 Report Share Posted July 3, 2013 I just relocate them in the downpipe. And weld up the original bung. Quote Link to comment
Docsis510 Posted July 3, 2013 Report Share Posted July 3, 2013 Take the big nut from the stock o2 location and put it on the egr location... or they sell that nut at the nissan dealer. Quote Link to comment
510Craven Posted July 3, 2013 Author Report Share Posted July 3, 2013 Take the big nut from the stock o2 location and put it on the egr location... or they sell that nut at the nissan dealer.That's what I was thinking of trying. Thank you for the confirmation I appreciate it! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.