tepa510 Posted February 26, 2013 Report Share Posted February 26, 2013 ive seen a few 510s with the spped hut tachs mounted inside the original gaugecluster and i was wondering what size to get so it fits inside the stock cluster Quote Link to comment
rpowell25 Posted February 26, 2013 Report Share Posted February 26, 2013 3-3/8 in Quote Link to comment
tepa510 Posted February 27, 2013 Author Report Share Posted February 27, 2013 i have an sr20det swap and im going to get the speedhut tach . does anybody know were to get the rpm signal from Quote Link to comment
Ranman72 Posted February 27, 2013 Report Share Posted February 27, 2013 i have an sr20det swap and im going to get the speedhut tach . does anybody know were to get the rpm signal from negative side of the coil I believe Quote Link to comment
tepa510 Posted February 28, 2013 Author Report Share Posted February 28, 2013 sr has 4 coil packs? Quote Link to comment
rpowell25 Posted February 28, 2013 Report Share Posted February 28, 2013 On my VG I get it off of the ECU. Get a pin layout for your ECU and it will be there. Edit: Try this http://community.ratsun.net/topic/30734-s13-sr20det-wiring/?p=459486 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.