JoeR Posted February 18, 2013 Report Share Posted February 18, 2013 My drivers' side window will not roll down and I figure I need to get into the door to see whats wrong. Whats the easiest way to remove the window crank? Does one need a special tool? As usual, Chilton's instructions are a little vague. Thanks! Quote Link to comment
Skib Posted February 18, 2013 Report Share Posted February 18, 2013 get a rang and shimmy it around between the handle and the door. the rag will grab the clip and pop the handle off. Quote Link to comment
andyathome Posted February 18, 2013 Report Share Posted February 18, 2013 mine had a small clip on the inside of the crank. just used a small screwdriver to pop the clip off. job done. Quote Link to comment
Alec 720 Posted February 18, 2013 Report Share Posted February 18, 2013 Yeah just a clip you need to pop off... a small flat screwdriver works fine. Quote Link to comment
RedBanner Posted February 18, 2013 Report Share Posted February 18, 2013 Or floss it out like skib said,,, then its in the rag and not flung accross the shop. Lol, youll get it! Quote Link to comment
Skib Posted February 18, 2013 Report Share Posted February 18, 2013 lol screwdriver method is for chumps :rofl: rag takes literally 30sec and the clip is still attached to the handle or is in the rag. 1 Quote Link to comment
jpturner2008 Posted February 22, 2013 Report Share Posted February 22, 2013 I use a small flat screwdriver on my window cranks. I also have use a paper clip with it bent on the tip on other vehicles as well. The screwdriver works best unless you go to the parts store and buy a window crank removal tool. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.