BenTerrible Posted November 1, 2012 Report Share Posted November 1, 2012 Searching for the 2 light bulbs that come with the factory tachometer for the 510. These have a small pigtail on each. Also need the wiring harness for the tach. Thanks, -BT Link to comment
MicroMachinery Posted November 1, 2012 Report Share Posted November 1, 2012 You should be able to pick up the light bulbs at any auto parts store. Link to comment
ggzilla Posted November 1, 2012 Report Share Posted November 1, 2012 If they are like these, they twist out. Pull the holders out of the tach, then push and twist the bulb just like Turn Signal lamps. Or do they look like #7? 3.4 watt Type 158 1.7 watt Type 161 Link to comment
yenpit Posted November 1, 2012 Report Share Posted November 1, 2012 I think they are the "snap in" type socket, like the turn signal bulb sockets. You might be able to use the t/s sockets with some splicing to the wiring, and I think the same 3 prong flat plastic plug was used somewhere else under the dash (??). All of my parts (tachs & dash/turnsignal) are already packed up for my move, so I can't verify this, BUT I did briefly look at that a few months ago, simply out of curiosity, and wondered if it would work in a pinch! Link to comment
Recommended Posts