kinetict Posted February 5, 2012 Report Share Posted February 5, 2012 So i got a new A14 motor bored .040 over with a h89 head. Could i run the stock hitachi carb? Or do i need to have it rejetted . If a get a Weber, what should it be jetted out to? Quote Link to comment
ggzilla Posted February 5, 2012 Report Share Posted February 5, 2012 Yes, use the stock hitachi carburetor. H89 and the overbore make little difference in jetting. Camshaft and exhaust changes will make bigger difference. Here is the jetting for a Weber 32/36 (DGV) Auxiliary venturis: 3.5/3.5 Main jets: 140/140 Emulsion tubes: F50/F50 Air correction jets: 170/160 Idle jets: 60/50 Jump jet: 50 Needle valve: 2.00 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.