jefe de jefes Posted September 4, 2011 Report Share Posted September 4, 2011 Anybody know how to wire up this thing to test it's operation? Not sure if my 1972 wiring will work with the motor since it's from a 68. **edit: I got it to work. Thanks Quote Link to comment
Andreas Posted December 16, 2011 Report Share Posted December 16, 2011 If you just want to see if the motor works, remove the liinkage, connect the metal part to the negative terminal. Use a multi tester to see which of the other pins will form a closed circuit with the single pin and hook those to the positive. If the shaft spins fast its good. If it is slow try to lube the shaft. If it still wont go fast, its bad. If it wont move, thats kinda stating the obvious :-) Quote Link to comment
jefe de jefes Posted December 16, 2011 Author Report Share Posted December 16, 2011 I tried it with my stock harness and it worked fine. Thanks for the tip though :) Quote Link to comment
crackerjack69 Posted December 17, 2011 Report Share Posted December 17, 2011 It's currently on the shelf waiting to be installed on my 620 Quote Link to comment
jefe de jefes Posted December 17, 2011 Author Report Share Posted December 17, 2011 It's currently on the shelf waiting to be installed on my 620 I had forgot where It ended up. Good luck with your project. ;) Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.