oldschool90 Posted January 15, 2011 Report Share Posted January 15, 2011 Up for sale are these beautiful BMW projectors. They have been modded to fit 9005 High-beam bulbs, and the insides have been polished for max output light. Both lenses only have minor pits in them. Better oics upon request. Lets say $60 + shipping. Includes ugly home made wiring/relay harness. (works great) Link to comment
Llittle_Llama Posted January 16, 2011 Report Share Posted January 16, 2011 These a direct bolt on for the 620's? If so I'll take them. Link to comment
Laecaon Posted January 16, 2011 Report Share Posted January 16, 2011 These a direct bolt on for the 620's? If so I'll take them. Direct bolt? Doubtful that BMW has the exact same mounting spots as 620. On a 510 its as simple as cut the mounting tabs off and use the 510 ring to mount. (wiring is something else) Does a 620 have those mounting rings to hold in the light? If not you will need to JB weld some mounts on. http://community.ratsun.net/topic/9323-install-bmw-ellipsoids-in-a-510/ Link to comment
Llittle_Llama Posted January 17, 2011 Report Share Posted January 17, 2011 What I meant was have they been modified to be a direct bolt on. I know they're not from the factory, lol. I think I'll pass right now, I'll probably do a headlight swap in a year or so and have HIDS already so it will be about as good. Link to comment
Icoblue Posted February 3, 2011 Report Share Posted February 3, 2011 I'm interested, PM me, I'd like better pics. Shipping to 99336? Link to comment
Radim Posted February 4, 2011 Report Share Posted February 4, 2011 I've got a set of these on my 620, you're going to have to cut the headlight buckets down to about 2in plus you have to cut and smooth the tabs on the headlight itself, easily be done in a day or a couple hours. Link to comment
Llittle_Llama Posted February 4, 2011 Report Share Posted February 4, 2011 Didn't you have a write-up on this Radim? I could have sworn you did but I wasn't able to find it. Link to comment
Radim Posted February 4, 2011 Report Share Posted February 4, 2011 No, i didn't do it, but use the write up for the 510, it's essentially the same thing except you don't have to dent your fender well. Link to comment
Recommended Posts