blasta510 Posted November 28, 2010 Report Share Posted November 28, 2010 I swapped a ka out of a 92 240sx into my 510. I had it running fine and then one day it just didn't have spark. Replaced the ignition and it had spark. Then out of no where it lost spark again. It does not have power to the coil or the dizzy. When it did before. I'm confused! Edit* Please move to electrical. Quote Link to comment
banzai510(hainz) Posted November 29, 2010 Report Share Posted November 29, 2010 the blk wht wire is the ignition "ON" wire. I will assume that you have this wire as the switchable Power to the other relays. the blk wire wire goes to the stock fuse box so ck the fuse and connections there also. if you have power on the blk/wht wire I assume the key switch part is good. Then I also assume you would ck your new fuse box you installed and ck the relays if it powers the ECU. I know Im doing alot of assumming!!!!!!!!!!!!!1 Quote Link to comment
blasta510 Posted December 2, 2010 Author Report Share Posted December 2, 2010 Got it running! Was the black with white stripe wire from the fuse box, the wire was separated in half. Twisted it together and bam! So excited to drive it in a few days. Quote Link to comment
banzai510(hainz) Posted December 2, 2010 Report Share Posted December 2, 2010 the blk wht wire is the ignition "ON" wire Whos your Daddy! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.