Shawn Abbey Posted August 9, 2010 Report Share Posted August 9, 2010 Greetings! Just pulled my "new" 521 out of a barn where it sat for the last 15 years. It was my Dad's, who got it from my Grandfather, who bought it brand new (I was there when it was delivered). So, now it is in my possession. It is presently tied to a flatbed where I hauled it from California. This thing is complete. The problem is that everything is either sunrotted, rusted (lower fenders) or been eaten by the packrat who made his home on the seat in the cab for the past 15 years. Now, that the packrat is evicted, the first goal is to get it running. Seems like I'll fix something and something else pops up that needs attention. Today, after doing a complete tune up, it started on its second attempt. And it ran! I did notice that it has a rusted out freeze plug, so it could hold no water, thus only run for a minute. I'll keep you posted..... This is going to be fun!! Hope you guys are available for questions when I get deeper into this.. Quote Link to comment
lil89ram50 Posted August 9, 2010 Report Share Posted August 9, 2010 get some pics when you get a chance man Quote Link to comment
nismo dr Posted August 9, 2010 Report Share Posted August 9, 2010 I can't see them either Quote Link to comment
521rat Posted August 9, 2010 Report Share Posted August 9, 2010 "new" or "invisible"?... Quote Link to comment
dat521gatherer Posted August 9, 2010 Report Share Posted August 9, 2010 I can't see them either HEHE. THATS GOOD STUFF. Welcome and good going getting this thing fired back up. Keepin it in the family. Thats what I'm talkin bout. Quote Link to comment
Shawn Abbey Posted August 10, 2010 Author Report Share Posted August 10, 2010 I would upload some pictures, but this forum won't let me post pictures........ why is that? Quote Link to comment
fryenretards Posted August 14, 2010 Report Share Posted August 14, 2010 i use photobucket.com and if you hover over the picture after u upload it to there website itll come up with an html code that u can paste on this website works for me Quote Link to comment
datson4life Posted March 28, 2015 Report Share Posted March 28, 2015 Still awaiting pics 1 Quote Link to comment
Shawn Abbey Posted April 7, 2015 Author Report Share Posted April 7, 2015 (insert whiney voice) But its soo hard....... Ok, here's what I have so far. Next project is either the rear bumper (thanks Daniel C for the offer! - I may still take you up on it), or new bushings in the front end. Sandblasted and powder coated the dash panel. I had a local upholsterer cover the dash. It's not perfect, but it will do for now. New upholstery and foam for the seat. Doors were done at the same time. I plan on using steam to smooth out that wrinkle, but not until I install new window tracts and rubber. It's been suggested that I lower it. I think just the opposite. I want to be able to take this truck anywhere I want to go, whether it be outdoors, hauling firewood, etc. That way, I know, I'll keep my front apron, and the undercarriage will remain intact and undamaged. I'm more of a Pre-Runner/4x4 type of guy. So, hence the 15" rims and tires. For comparison purposes, here's how it looked when I got it. Long way to go..... 1 Quote Link to comment
ggzilla Posted April 7, 2015 Report Share Posted April 7, 2015 Do the bumper, it will make it look nice. Quote Link to comment
datson4life Posted April 7, 2015 Report Share Posted April 7, 2015 Nice!!! Took you 5 years but got them Quote Link to comment
Shawn Abbey Posted April 7, 2015 Author Report Share Posted April 7, 2015 Thanks! You guys are patient! 2 Quote Link to comment
spdcrazy Posted April 8, 2015 Report Share Posted April 8, 2015 cool truck! happy to see its still owned by family. and make it your own! just don't hack up the sheet metal to fit some 37.5 tires would ya? interior looks great now! bet that paint will buff out well! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.