Jump to content

distribuer


Recommended Posts

  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

You have a points type dizzy installed right now?

 

If you upgrade to a Ei dizzy your engine will probably run smoother and you'll have a lil more power. Plus you won't have to mess with adjusting points.

 

So to answer your question. Yes you can change it if you want. Should you? If your not happy with the points type, sure. It's one of the first mods I do to any of my engines.

Link to comment

since you have a 79 run the matchbox distributor. The dizzy will not know if its a L16/18/20

 

You truck is wired for the matchbox anyways. Use the 79 as a whole assmebly with the pedastal with matching timming plate.

 

if you use a Point dizzy the 79 doesn not have the HOTSTART wire an you need to add a ballast resisitor and a stock point coil.otherwise your points will burn up using the matchbox coil as its a lower resisitance and current will be more than double causing arching on the points.

 

best to line motor up to TDC install the dizzy and where it locks down will be #1 plug wire then go 1 3 4 2 counter clockwise

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.