sparkle Posted July 7, 2010 Report Share Posted July 7, 2010 does anyone have a picure of the above? Can find on L series, but not for J! Quite urgently if possible Quote Link to comment
sparkle Posted July 7, 2010 Author Report Share Posted July 7, 2010 or even if someone could tell me what they were? there is 4 marks, and the difference between 1st and 2nd is almost double the second two. Quote Link to comment
datzenmike Posted July 8, 2010 Report Share Posted July 8, 2010 Good question. Bear with me on this. The L series has a saw tooth timing scale bolted to the timing chain cover and the timing mark is a small V notch in the rear pulley. I'm just guessing here but the J series may have multiple V marks on the pulley and a single pointer bolted to the motor. Same thing really. (again, just guessing here) Set the motor to near TDC on the compression stroke and find those marks. Now look around near those marks for a pointer. The reason for the wider gap on the first two marks is that they are 5 degrees each and you aren't ever going to need to set the timing at 5 or 10 degrees. The next two are likely 2 1/2 degree increments which is closer to where the timing will be set. Again this is total speculation. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.