made some filters for ram pipes

[Tyler]

Being cheap, I wanted to find an affordable filter for my newly acquired stacks. Let me know what you all think and what changes should be made. My main concerns are:

1. Safety (spit back from carbs)

2. Filtration

3. Durability

 

The filter is made of a piece of shop vac sock filter sandwiched between two screens.

 

 

[Braden]

looks like it will work decent, how many micron do they filter? check these out, i bought a set of these but do not have them yet, ill let you knwo how they turn out http://www.bills-b-racing.com/

[Tyler]

No idea on the micron number. I was hoping the package would have given me a little info on that. Those bill filters are sweet!

 

I'm going to run my setup for a week or so, take them apart and check them out. I may change the shop vacuum filter to the filter foam used in lawn mower air cleaners.

[Braden]

they arent too pricey either, check out wolf creek racing, todd walrich sells them for 75 bucks for a set of 4!!!!

[hang_510]

about the same price...

http://www.piercemanifolds.com/PhotoGallery.asp?ProductCode=99217.225

 

 

 

from these designs, its probably best to leave the sock out, maybe another layer or 2 of screen???

[Tyler]

about the same price...

http://www.pierceman...tCode=99217.225

 

 

 

from these designs, its probably best to leave the sock out, maybe another layer or 2 of screen???

 

That's what I was thinking at first. Anyone have any experience with just running a screen type filter?

[hang_510]

That's what I was thinking at first. Anyone have any experience with just running a screen type filter?

i had planned on the Pierce Mani filters, but for $70+, i just put the K&N's back on.

def in the future plans though!

 

 

too much crap on the roads here, plus the sand (being near the beach) to run w/nothing