85NAPSZ Posted June 9, 2010 Report Share Posted June 9, 2010 When I first got my truck I got a local machine shop to make me a "custom" shift knob. Well, since I live in the good ole Alabama and it's summer, my awesome shiny billet shift knob gets about 100 degrees easily. And, to make things better, the machine shop kept my OE one and they threw it away. I picked up two from the local Pull-A-Part, both of which were from 720s. Which one should I use once I clean them up a bit? Quote Link to comment
sinner720st Posted June 9, 2010 Report Share Posted June 9, 2010 the one on the right is what i use (720) and what i have seen on all 720's... i cant tell what the top of the other one looks like but it looks kind of cool. i would run whichever one feels better. i ran one out of a camry for a while because it felt cool... but it looked really dumb in my truck, so i switched back to stock... Quote Link to comment
85NAPSZ Posted June 9, 2010 Author Report Share Posted June 9, 2010 That's another thing about my billet knob, it just looks retarded and out of place. I'm going to re-do both of them, since they both need some TLC. The left feels a little better, and it came from a 720 so I know it fits. I just wanted some other opinions on it. Quote Link to comment
elmerfudpucker Posted June 9, 2010 Report Share Posted June 9, 2010 I would go with the left one myself if it feels better. I changed mine to one I picked up from Autozone and then 30 minutes with a drill and a couple of blue LEDS now I got this... Quote Link to comment
85NAPSZ Posted June 9, 2010 Author Report Share Posted June 9, 2010 Ha, dang..that's pretty sick. I don't want to go too extreme, I'm not really sure how much longer this old 720 is going to last. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.