nachito61977 Posted June 6, 2010 Report Share Posted June 6, 2010 hello i am new to the forum, sold my goon and picked up a 520 last year and now i am looking to get it running but i have run into a electrical problem. does someone have the diagrm to a 66 pl520 thanks Quote Link to comment
e_racer1999 Posted June 6, 2010 Report Share Posted June 6, 2010 Welcome! What part of SD? Quote Link to comment
jefe de jefes Posted June 6, 2010 Report Share Posted June 6, 2010 Welcome Nacho. Don't the haynes or chilton books have those wiring diagrams. Quote Link to comment
nachito61977 Posted June 6, 2010 Author Report Share Posted June 6, 2010 Welcome! What part of SD? i live in downtown SD Quote Link to comment
Pacific coast Datsun Posted June 6, 2010 Report Share Posted June 6, 2010 Welcome Nachito. I have an old repair manual that may have the diagram you need. Or check em out online here.......... http://www.olddatsuns.com/620tech.htm Quote Link to comment
nachito61977 Posted June 7, 2010 Author Report Share Posted June 7, 2010 Welcome Nachito. I have an old repair manual that may have the diagram you need. Or check em out online here.......... http://www.olddatsuns.com/620tech.htm thanks ill check it out. I just finished removing the clutch, found bad springs on the pressure plate. any suggestions on where to find a clutch set? Quote Link to comment
Pacific coast Datsun Posted June 7, 2010 Report Share Posted June 7, 2010 That may be a tough find. Most parts stores wont know what a 520 is. Maybe www.rockauto.com will carry it. Quote Link to comment
nachito61977 Posted June 7, 2010 Author Report Share Posted June 7, 2010 That may be a tough find. Most parts stores wont know what a 520 is. Maybe www.rockauto.com will carry it. thanks i was able to find the wiring diagram that i needed on the 620 page. thanks again for the info next is rockauto Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.