pickleweasle Posted February 13, 2010 Report Share Posted February 13, 2010 Whats up everybody. But really I have a 79 620 I plan on dropin it today i've allready done the rear but the front im not to sure bout. I haven't mess with alot of torsion bar trucks and i'm not sure if the strut bars are going to be an issue with lowering. If so how do I fix this problem? I've been thinkin that i would just use a pipe threader and shorten them just a lil. Quote Link to comment
skunk Posted February 13, 2010 Report Share Posted February 13, 2010 blah blah blah welcome and all that, show me some pics. but welcom to ratsun, now post pics :D Quote Link to comment
74datsun620 Posted February 13, 2010 Report Share Posted February 13, 2010 Welcome to ratsun, There is a lot of torsion bar lowered trucks here and most seem to go one setting down and nothing else but aline front end. Quote Link to comment
fisch Posted February 13, 2010 Report Share Posted February 13, 2010 Welcome! Check out the FAQ there is tons of info on torsions there. Ratsun FAQ Quote Link to comment
MudThug Posted February 13, 2010 Report Share Posted February 13, 2010 I just did my 79KC and it was super easy. There are a few write-ups here that you will want to search for and they lay it out very well. The one thing I will recommend is better front shocks. I had a good set of monroe gas shocks up front and they weren't enough (maybe the KC?) and I went with the KYB GR2 and they are better. I wish I had gotten the KYB Gas-A-Just though, but not sure if they make it for our trucks. Quote Link to comment
pickleweasle Posted February 14, 2010 Author Report Share Posted February 14, 2010 Aight that helps thanx. I'm gonna try and post some pix asap but we just got snow and i can't get tha truck out without spinning lol. Prob a stipid question but where could I find a bed for the truck mines bout shoot. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.