heinekenns Posted November 28, 2009 Report Share Posted November 28, 2009 Located in Bedford, VA. I have a problem with starting too many projects at the same time. I had wanted to do something fun with this 1974 620, but I really should finish one project at a time. The truck is a great piece to start with - NO Rust. OK, there is some surface rust forming on the frames, but no rot in any panels or on the frame. Overall, a great platform. It's an auto with a siezed engine, clear title, straight frame and body. I have also collected alot of parts over the years - any one of these engines would make a killer project. Head over to the photobucket link and look at the pictures. I have: L20B complete VH45DE complete with auto and ecu RB20DET complete with awd trans and ecu FJ20ET with custom equal length top mount mani, trans, and few other upgrades 1UZFE complete engine Several VG30DE's in various states SDS v.3 standalone engine management system (fuel and spark) I also have a rusty Celica RA21 (trunk version) So, if any of these vehicles, or combinations of vehicles+parts+engines sounds interesting, let me know. If you have a project that you'd like to trade, I'll listen too (no more datsun trucks, please). I'm really interested in an FJ Land Cruiser (60 or 80) if I can find one. http://s434.photobucket.com/albums/qq66/heinekenns/Project%20Parts/ Link to comment
JDM510 Posted November 28, 2009 Report Share Posted November 28, 2009 damn that FJ is bad ass.... I WANT I WANT!!!!! Link to comment
7-seven_four-4 Posted November 29, 2009 Report Share Posted November 29, 2009 Pictures of that celica? Link to comment
Skib Posted November 29, 2009 Report Share Posted November 29, 2009 pics/info/price on the SDS v.3? Link to comment
RadioRedline Posted November 29, 2009 Report Share Posted November 29, 2009 How much for the RB20 setup Radio Link to comment
motavated Posted November 29, 2009 Report Share Posted November 29, 2009 how much for the fj and the 620? Link to comment
heinekenns Posted November 29, 2009 Author Report Share Posted November 29, 2009 7-4, I will get pictures later this week if you are interested. Did I mention it is rusty? It has a 20R and will start and drive. A 1UZ would be fun in that car - now who has one of those engines for sale? Skib, It is an EM-3 F. I have two eeproms for it. One is for a 4cyl with a 3.5bar map sensor and the other is a 6cyl with a GM 3bar map sensor. It has a 3 coil setup for up to 6 cyl. I used it first on an RB26, and then on my FJ20. I'll include both eeproms (4 and 6 cyl), map sensors (AEM 3.5bar, GM 3 bar), idle air control valve, LCD programmer, Air temp sensor, Water temp sensor, main wiring harness, Injector harness, Fuel trim control, +, - 50%, Crank sensor, and Coil/amp unit for 750 + shipping. RadioRedline, The RB20 needs a new crank timing-belt cog. I took the front cover off to replace the oil pump and this had to be cut off since it seized to the snout. The oil pan is the same as the RB26 AWD, and I have already cut the differential off and cleaned it up for use RWD. I'll include the motor, trans, wiring harness, ecu, and all the parts it came with for 900 + shipping. Motivated, I'd like to get 700 for the datsun. It is a really good start for a project. The truck is straight and clean. PM me with more questions about the FJ - like what transmission, parts, etc. Link to comment
ctaylor Posted December 5, 2009 Report Share Posted December 5, 2009 74 620 u still have it im in va and id like to see it Link to comment
kaliboy96 Posted January 13, 2010 Report Share Posted January 13, 2010 Would you be interested in selling the intake manifold , plenum, and throttle body? Will it mount to a Z20e block? Link to comment
Bulletside Posted January 14, 2010 Report Share Posted January 14, 2010 Any update? Is this truck still available??? Link to comment
TrevDaddy Posted January 17, 2010 Report Share Posted January 17, 2010 Pictures and price for the L20? I would like to swap one into my 73 Link to comment
Recommended Posts