imtb Posted August 20, 2009 Report Share Posted August 20, 2009 Anybody ever taken out the door glass ? Is it very hard? Any tips? Is it easy to take the whole door off? What procedure for the door? Quote Link to comment
hang_510 Posted August 20, 2009 Report Share Posted August 20, 2009 Anybody ever taken out the door glass ? YES Is it very hard? NO Any tips? WHAT CAR? Is it easy to take the whole door off? YES What procedure for the door? HAVE A HELPER OR SUPPORT IT FROM ABOVE if its the 510(read the haynes, etc manual)..., remove all the hardware and the panel. not the sliding side but the other end has a clip (cotter pin style) facing the door, reach behind and remove it. pull the glass off of the pivot. slide the glass out of the chanel and remove. install is the reverse... Quote Link to comment
Guest 510kamikazifreak Posted August 21, 2009 Report Share Posted August 21, 2009 As hang_510 said, It is pretty simple, To make it a bit easer pull the belt molding(chrome door molding)off ,to take the glass out, Or a brick or rock will work too,Might not get the final result you are looking for tho:blink::lol:Re-Instillation this way may be a bit difficult,But if you are good with crazy glue might work:eek: Quote Link to comment
Cuts metal like mad Posted August 21, 2009 Report Share Posted August 21, 2009 :lol: Quote Link to comment
imtb Posted August 21, 2009 Author Report Share Posted August 21, 2009 ha LOL checked the manual and trying to decide if i should change the door or jus the glass. I been wondering how you take off the trim on the outside of the door. Quote Link to comment
datsun8 Posted September 1, 2009 Report Share Posted September 1, 2009 as far as I can tell, you can't remove the chrome trim. But you don't need to. once you have the window released from the regulator, you rotate it about 45 degrees and you can shimmy it out. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.