kgrantkey Posted September 13, 2021 Report Share Posted September 13, 2021 Years ago I replaced my distributor with the inductive pickup type that required the ignition module on the passenger side kick panel. I didn't have the ignition module so I used an ignition module from "i believe a 77 camaro" that has 4 lugs that sends the voltage to the coil for spark each time the distributor triggers. I used a nice diagram from this site. I'm not using the dizzy that has the square module on the side of the distributor. Anyone have a link to help me determine if I have a bad ignition module or coil......I just went to start it a few hrs ago and have no spark from the coil. Trid to search the site but couldnt fond what I was looking for. It may have been a link to the 521 site. ? Quote Link to comment
kgrantkey Posted September 13, 2021 Author Report Share Posted September 13, 2021 Found what i needed in the How To thread. Should have went there 1st. Thanks for maintaining this site for those of us that are lucky enough to have something the just works - I never sell my Lil Hustler. Wish I'd never sold my 79...or my 72 Datsun Trucks. Quote Link to comment
kgrantkey Posted September 13, 2021 Author Report Share Posted September 13, 2021 Years ago I got any dizzy that looked salvageable from the local pull-it-part. There is a plastic ball bearing piece in the distributor that made me give up on installing a dizzy. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.