Yellow_Feva Posted August 22, 2013 Report Share Posted August 22, 2013 Well I have had my 240Z for 2 weeks now so its time to document my build Specs: 72 240Z 104K on Body 11,343 on engine, turbo, tranny and diff. 1982 L28ET Borg Warner 5 speed Tranny R200 Diff non lsd Front toyota 4 pot brakes Rear drums So far i have done lots of maintenance, cleaning, pulling out the interiors to clean and inspect. Changed thermostat, new MSD fuel pump, all fluids, plugs, fixed bumpers, lights, new gauges, new straight pipe, my beautiful Hoshino wheels, lowered her a bit more, rolled and pulled fenders and bought more parts. Since the engine, tranny, diff and turbo rebuild it has been 11,343 miles so more power is the word Already have a Jim Wolfe ECU for 420cc injectors, Cobra Maf, New 420 cc Injectors, having a front mount fabricated this week, manual boost controller, and other little things. The goal now is 350HP I love the bodylines of the Z so I really did not want to install flares so after a lot of research and measuring I was able to fit my Impul Hoshinos. Wheel specs: Impul Hoshino G5 Fully polished front 15x9.25 -13 (5 inch lip) Rear 15x9.25 -38 (5.5 inch lip) No rubbing at all As soon as my power goals are accomplished she will be off for body work and a new coat of white paint, she has a couple of rust bubbles very minimum tho so this will be corrected. Here a couple of quick pictures from a car show in the local area a couple of days ago. 1 Quote Link to comment
Yellow_Feva Posted August 22, 2013 Author Report Share Posted August 22, 2013 Reserved for future. Engine Pics: Interior Shots: Quote Link to comment
PrimeLuxeZ Posted August 22, 2013 Report Share Posted August 22, 2013 Dear baby Yeezus. That S30 is one of the sexiest I have seen thus far. Quote Link to comment
PrimeLuxeZ Posted August 22, 2013 Report Share Posted August 22, 2013 Planning on putting flares? Quote Link to comment
Yellow_Feva Posted August 22, 2013 Author Report Share Posted August 22, 2013 No flares man trying to keep it as clean as possible. Quote Link to comment
jdizzy204 Posted August 23, 2013 Report Share Posted August 23, 2013 Those rears appear to be poking out quite a bit. You say you are trying to keep things clean but that exhaust says otherwise. Flares would look great on this car. Also, what coilovers are you running? Quote Link to comment
Yellow_Feva Posted August 23, 2013 Author Report Share Posted August 23, 2013 There's no rust in the fenders so I dont want to destroy them adding flares, maybe when I get it painted ill extend the rears just a bit Before I got the fenders rolled and pulled they did stick out quite a bit but now they sit pretty good, ill take a pic tomorrow. Right now its on unknown lowering springs but im getting a set of T3 coilovers soon. Quote Link to comment
M240Z Posted August 24, 2013 Report Share Posted August 24, 2013 Research your coilover options. T3 will go low but you wont have much travel. Quote Link to comment
240zphilly Posted August 30, 2013 Report Share Posted August 30, 2013 i guess this answers my q from the other pic. not sure where you are in florida but if you need help my buddy and i build fast cars for a liviing in miami Quote Link to comment
240zphilly Posted August 30, 2013 Report Share Posted August 30, 2013 nvm, location says orlando, lol id love to see the car in person some day anyway. Quote Link to comment
JohnnyWas Posted September 2, 2013 Report Share Posted September 2, 2013 be nice to see an ass shot -- curious to see how the wheels fit from behind beautiful car, man. Quote Link to comment
Joey J Posted September 5, 2013 Report Share Posted September 5, 2013 I can't get over how sick those hoshinos look on the Z bro. I'm jelly lol. Do the T3 coilovers have adjustable height without affecting the spring preload? If they don't I really would recommend going with the Mckinney set. They're fully adjustable without messing with the springs preload, also has dampening adjustment. Quote Link to comment
Yellow_Feva Posted September 16, 2013 Author Report Share Posted September 16, 2013 Ill be getting the Mckinney coilovers soon but I have been dealing with a fuel issue for the past month. Quote Link to comment
Joey J Posted September 17, 2013 Report Share Posted September 17, 2013 Can't wait to see the turn out Quote Link to comment
wangan240z Posted January 31, 2014 Report Share Posted January 31, 2014 Looks absolutely awesome. Where on earth did you get such awesome looking Hoshino's? I didnt know they came in 15inch! Im hunting for some RIGHT NOW! Hahaha! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.