priest Posted August 8, 2013 Report Share Posted August 8, 2013 I am re-attaching my turn signal and illuminator plugs to the back of my Tachometer, however I forgot to mark which male connections are attached to which female connections on the back of the instrument. As you guys know, two male connections have red wires, and two have alternating green and red wires. Which two are the illumination connections, and which two are the turn signals. Is there any specific order in which to put the connections in the back of the instrument?The reason I ask is that I was able to get one illuminator to work and the left turn signal, but nothing else. I found out through trial and error that they need to be grounded to the instrument in order for them to illuminate. Any help would be appreciated. Steve Quote Link to comment
MikeRL411 Posted August 8, 2013 Report Share Posted August 8, 2013 The 311 ORG web site may have wiring diagrams. The 510 site once had a very good selection of DATSUN and NISSAN wiring diagrams but the link ti their site on the site appears to be broken. See if our Electric section has any leads. Quote Link to comment
priest Posted September 2, 2013 Author Report Share Posted September 2, 2013 I have it figured out. It is most likely my Turn Signal Relay. The lights are in the correct place now. Thanks. BTW, Green and Red = Turn signal / Red = Illuminators Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.