gcs16 Posted November 20, 2011 Report Share Posted November 20, 2011 Is there any tips or tricks to removing the bottom nut from the engine mount on a 79 210? Tried modifying a wrench with no success. The only other way I see is unbolting the crossmember. Quote Link to comment
80datson Posted November 20, 2011 Report Share Posted November 20, 2011 box open end should work. it did for me Quote Link to comment
gcs16 Posted November 20, 2011 Author Report Share Posted November 20, 2011 I can get one on the nut but it won't clear the fender well need a shorter wrench I guess. Quote Link to comment
80datson Posted November 20, 2011 Report Share Posted November 20, 2011 yeah what i did actully was use a wrench i didnt need. and where it kind of cures on the box side i bent it more almost like a letter J do you know wat i mean? Quote Link to comment
gcs16 Posted November 20, 2011 Author Report Share Posted November 20, 2011 Yeah that's what I tried but I used a cheap stamped wrench that ended up actually stripping the wrench. the only other one I have is a good one I dont want to bend. Going to go check the storage for another. Thanks Quote Link to comment
ggzilla Posted November 21, 2011 Report Share Posted November 21, 2011 To get the isolators unbolted, you need the special Nissan tool: Quote Link to comment
gcs16 Posted November 22, 2011 Author Report Share Posted November 22, 2011 Got mine ordered from the dealership. Thanks Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.